- 电压击穿试验仪
- 介电常数
- 电阻率测试仪
- 粉末电阻率测试仪
- 导体、半导体电阻率
- 耐电弧测试仪
- 漏电起痕试验仪
- 落球回弹试验仪,介电击穿强度测定仪:电池隔膜电弱点测试仪
- 橡胶塑料检测仪器
- 力学性能检测仪器
- 海绵泡沫材料检测仪器
- 受电弓/碳滑板检测仪器
- 落球回弹试验仪,介电击穿强度测定仪:材料热物理性能实验设备
- 热物性检测仪器
-
粉末测试设备
-
霍尔流速计
-
真密度测试仪
-
斯柯特容量计
-
休止角测定仪
-
粉末压实密度仪
-
振实密度测试仪
-
颗粒图像分析仪
-
全自动真密度仪
-
塑料流动性测定仪
-
粉尘安息角测试仪
-
落球回弹试验仪,介电击穿强度测定仪:多功能压力测量系统
-
落球回弹试验仪,介电击穿强度测定仪:粉末自然堆积密度仪
-
落球回弹试验仪,介电击穿强度测定仪:粉体综合物性测试仪
-
氧化铝流动角测定仪
-
落球回弹试验仪,介电击穿强度测定仪:塑料表观密度测试仪
-
普通磨料堆积密度仪
-
落球回弹试验仪,介电击穿强度测定仪:白土堆积密度测定仪
-
氧化铝流动时间测定仪
-
落球回弹试验仪,介电击穿强度测定仪:压实密度粉末电阻率仪
-
落球回弹试验仪,介电击穿强度测定仪:陶粒砂体积密度测定仪
-
氧化铝松装密度测定仪
-
表面活性剂表观密度仪
-
自由流动堆积密度测定仪
-
超硬材料堆积密度测定仪
-
霍尔流速计
- 比表面测试仪
- 电池检测
- 燃烧性能试验机
- 金属检测仪器
-
焙烧炉试验机
ASTMD495耐高压低电流电弧放电试验机
高线电压小电压耐压检测仪(耐焊弧耐压检测仪)-(计算出来机掌握)
High voltage low current tester (arc resistance tester) - (computer control)
企业产明称称:耐电弧试验机
Product name: electric arc resistance tester
新产品机型:NDH-A
Product model: NDH - A
够满足标准的:GB/T 1411-2002《固态接地装修材料耐高压得过低直流电电弧焊接充放电的校正》(等同于IEC 61621-1997)及ASTM D495等基准的标准装修设计制造厂的,并非常符合IEC 149、UL
Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc
一 概述
一An overview of the
通常支持标准及功能模块:
本测式机是通过适适用电机的、家电和生活费家电等制造行业的电工维修用金属、聚酯聚酯树脂胶和接地性漆等接地性板材的耐脉冲安全能力评判,主适用固态垃圾接地性板材如:金属、透气膜、聚酯聚酯树脂、云母片、卫浴陶瓷、破璃、接地性油、接地性漆、瓦楞纸板等物料的耐脉冲安全能力测式;
本做试验的时候机由计算公式机调整运作,可不可以表示现行试验环境及试验日期,试验完后并保存文档现行试验统计资料,并可彩打.标淮实验室计划书。
Main scope of application and features:
This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;
This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report
二 功能特点
1 远程服务器为上一起成分,中下部为作业整体,顶部为现场实验箱。
2 本成品所采用*新智力操控枝术,使用进行程序流程(IEC或ASTM)可自动的完成耐压,并在租赁上表示冲击试验操作过程和可是。
3 **耐磨性正常,抗干预力强,检测高精度就越高。
二:Functional features:
1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.
2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.
3 good safety performance, strong anti-interference ability, high test precision.
三 主要技术参数
1 电孤通断时刻不确定度:值为 ±10ms
2 调压器存储空间:2kVA
3 稳定实验电阻:12.5kV
4 试验装置电压电流导致精度:±3%
5 工作电流把控精确:±10% 工作电流量测精准度:1.5%
6 电极材料对试板各种压力:(0.5±0.05)N
7 金属电极材质:钨棒
8 工业长度:(6.35±0.1)mm(IEC)
(6.0±0.1)mm(ASTM)
9 选用生态外部环境变化表:(23±2)℃
10 动用生态环境湿球温度:(50±5)%
11 电压:220V±5% 50Hz
12 校正 具体方法: 国家行业标准/美标/10 mA 连续性/20 mA 连续式/30 mA连续式/40 mA连续式
13 耐压试验程序代码如下图所示:
| 程序流程图段 | 电孤电压电流 mA | 弧光通断时段s | 各步骤段保持日子s | 试验台总用时s | |
| | | IEC 61621 | ASTM D495 | | |
| 1 | 10 | 1/8s通 7/8s断 | 1/4s通 7/4s断 | 60 | 60 |
| 2 | 10 | 1/4s通 3/4s断 | 1/4s通 3/4s断 | 60 | 120 |
| 3 | 10 | 1/4s通 1/4s断 | 1/4s通 1/4s断 | 60 | 180 |
| 4 | 10 | 连续式通 | 60 | 240 | |
| 5 | 20 | 连续不断通 | 60 | 300 | |
| 6 | 30 | 连续性通 | 60 | 360 | |
| 7 | 40 | 连续性通 | 60 | 420 | |
Three main technical parameters:
Error: 1 arc on-off time less than plus or minus 10 ms
Transformer capacity: 2 kva
3 test voltage rating: 12.5 kV
4: test voltage accuracy + / - 3%
5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%
6 electrode pressure on sample: (0.5 + 0.5) N
7 electrode materials: tungsten rods
8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)
9 using the environment temperature (23 + 2) ℃
10 use environment humidity: (50 + 5) %
Power supply: 220 v + 5% for 50 hz 10 a
Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous
13 test procedure is as follows:
Procedures section of the arc current
MA arc on-off time s the program s test total duration time s
IEC 61621 ASTM D495
1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s
2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s
3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s
4 consecutive 10 to 60, 240
5 20 consecutive 60, 300
30 consecutive 6 to 60, 360
7 consecutive 40 to 60, 420
四 配置
| 顺序号 | 种类 | 数目 | 微信备注名 |
| 01 | 耐弧光测试图片仪 | 单台 | |
| 02 | 电极材料体统 | 两套 | |
| 03 | 电级橡胶支座 | 一种 | |
| 04 | 电源适配器电览 | 这套 | |
| 05 | 一定接地放** | 每支 | |
| 06 | 电流值毫安表 | 整台 | |
| 07 | 手提电脑测控图片软件 | 1套 | |
| 08 | 样品架 | 一部 | |
| 09 | 工业远距离原则块 | 2块 | |
| 10 | 层面规范块 | 2块 | |
| 11 | 卫浴陶瓷片 | 2片 | |
| 12 | 喷墨打印纸机 | 1台 | 项目 |
| 13 | 计算出来机 | 1台 | 茶叶品牌 |
| 14 | 食用描述书 | 1份 | |
| 15 | 合格率证 | 1份 | |
Four configuration:
Serial number name number note
01 arc resistance tester
02 a electrode system
03 electrode bearing a set
04 a set of power cable
05 ground put a rod
06 milliammeter current one
7 a set of computer measurement and control software
08 specimen holder a
09 electrode distance standard 2 blocks
Standard 2 blocks of 10 Angle
11 ceramic pieces 2 pieces
12 one brand inkjet printer
13 1 computer brand
14 1 instruction manual
15 1 certificate
五 物料规格型号:
NDH-A 耐电弧放电检测仪-微机管理
NDH-B 耐电孤校正仪-触屏屏掌握
Five product model:
NDH - A arc resistance tester - microcomputer control
NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!